Direct Flow reverse osmosis. RO filtered water in real time without previous accumulation. 

Drinking fountain SERIES 6OI

With integrated Direct Flow RO system. RO filtered water in real time without previous accumulation. Greater security.

  • Includes a high capacity direct flow RO filtration system that eliminates suspended solids and microorganisms to ensure the highest quality of pure water.
  • High RO water production. No need to have accumulation tanks with RO water at room temperature avoiding possible contamination sources.
  • Made externally and internally of stainless steel.
 

Models 


M-66ALVOI
Water with three temperatures: ideal for any time of year.
Jet with three water temperatures.
Cold: Operated by pedal.
Room temperature: Operated by push button.
Mixed: Pedal and push button simultaneously.
Bottle-filler (small bottles) operated by push button for cold water.

 

DIRECT FLOW REVERSE OSMOSIS SYSTEM


DESIGN
Comparing with the traditional system, the Direct Flow RO provides a large flow of water, greater security and less rejected water.


Direct Flow Reverse Osmosis Filter



3 STAGE FILTRATION WITH A PUMP
Activated carbon filter and sediments of 5 µm.
Two membranes of 220 GPD.
Filter GAC in Line Block.
Very powerful and silent pump.

HIGH PERFORMANCE AND HIGH EFFICIENCY
High purified water production:100 liters/hour (nominal).
High rate of input water use: 50% (comparing with the traditional system).

VERY EASY MAINTENANCE
The special design of the equipment makes it very easy to maintain.


 
Conform to electrical safety standards
Conform to sanitation standards
Conform to 98/83/EC standard
 

 

COOLING POWER (W)400
POWER CONSUMPTION (W)200
VOLTAGE 230 V 50 Hz single-phase (A) (Consult other options)0.9
COOLING CAPACITY (l/h)35
WATER OUTPUT TEMPERATURE (ºC) (Regulated by thermostat)4 - 11
REFRIGERANT GAS (CFC - Free)R-134a
WATER TANK CAPACITY (l) (Optional: stainless steel direct chill)4,5
DIMENSIONS (mm). Height x Width x Depth. Bottle-filler + 210mm1030 x 360 x 470

Model M-66ALVOI

Drinking fountain SERIES 6OI Canaletas

PURIFICATION FILTERS

An active carbon water filter is recommended in order to obtain optimum water conditions, thanks to the elimination of bad tastes and smells like that of chlorine and small particles or contaminants that can be present in water.
 

Models


M-105
Plastic housing and cartridge C-115.
Maximum pressure 8 Kg. / cm³
½ inch water supply.
 
M-115
Stainless steel housing and cartridge C-115.
High pressure tested, up to 21kg / cm³ (especially with sudden increases in water pressure).
½ inch water supply.

CARTRIDGE C-117
Spare cartridge for filters M-105 y M-115.
This cartridge is specially selected by Canaletas for its drinking fountains, for their high quality and performance because these fountains require a high filtering capacity.
Active carbon block cartridge with 5µm filtration and a working life of more than 22,000 liters of water or approx. 1-year duration.
Combines the functions of a sediment filter, that eliminates the small particles that could be in the water, along with the properties of active carbon for possible bad tastes and smells. The polypropylene pre-filtering layer extends the cartridge life.
nsf-sello
 
RECOMENDATION
Canaletas recommends changing the cartridge of the purification filter once a year, especially before summer, but it could be more often depending on water quality and degree of use.
 
 
 

After Sales Service

Canaletas After Sales Service or an authorized distributor, can offer a complete maintenance of the water cooler including the CANVAP sanitation system.
 

What is sanitation ?
 
pdf Download pdf  Request information
 
About Us
European manufacturer since 1965
Canaletas is a pioneer manufacturer in Europe with over 55 years experience in the design and manufacture of a wide range of drinking water fountains and water coolers.
Fullfils standard 98/83/EC:
Quality of water intended human consumption
Press
The new Canaletas M-99IDOP model drinking water fountain is adapted to the demanding health measures of today. It is a “hands-free” drinking water fountain specially designed to refill 0.5 litre bottles, eliminating the use of plastic cups.
Canaletas has had several consecutive years of growth in invoicing, and is also pleased to celebrate its 55th anniversary this year. The manufacturer, with headquarters in Barcelona, has specialised in the production of water coolers since being founded in 1965, and is one of the leading manufacturers in this sector in Europe.
Canaletas participated in this study, carried out by Laboratorio Dr. Oliver Rodés, which included the analysis of several of its water coolers. This project was promoted by the Association of Water Cooler Distributors and Bottlers (ADEAC).
Spain-headquartered water dispenser manufacturer Canaletas claims that demand for ‘hands-free’ water fountains has increased significantly due to hygiene concerns arising from the Covid-19 pandemic.
acolor.es - Diseño de paginas webbuscaprat.com - Guia comercial de el prat
aColorBuscaprat
... ...